1. Y83 Series Is Designed for Aluminum Chip Briquetting
- Hydraulic metal chip briquetting press widely used for aluminum chips, steel chips, iron chips, and copper chips.
- Compresses loose metal swarf into high‑density cylindrical briquettes.
- No heating or additives required – briquettes can be charged directly into the furnace.
- Helps reduce melting loss.
2. Aluminum Chips Are a Typical Application
- Aluminum chips, aluminum sawdust, aluminum turnings, and light aluminum swarf are typical feed materials.
- Some Y83L models are specially modified for aluminum chips.
- Aluminum is light, bulky, and difficult to feed.
- Pre‑compression cylinder and widened feeding inlet improve compression ratio and production stability.
3. Briquette Density Is Lower Than Iron but Suitable for Melting
- Iron chip briquettes can reach about 5 to 6 tons per cubic meter.
- Aluminum chip briquettes are usually lower due to lower material density.
- Final density depends on chip size, moisture, oil content, pressure, and mold design.
- Oily aluminum chips can benefit from cutting fluid separation during pressing.
4. Confirm the Exact Model Before Purchase
- Y83 includes many sub‑models such as Y83‑2500, Y83‑3150, Y83‑5000, and Y83L aluminum chip versions.
- Buyers should confirm nominal force, briquette size, hourly capacity, aluminum chip compatibility, PLC control, cooling system, and after‑sales support.
- Y83 is generally suitable for aluminum chips, but final selection must match the chip form and smelting requirement.
