Semi-Automatic Horizontal Baler Vulnerable Parts
Hydraulic System Components
Seals
- Includes O-rings of cylinder pistons and seals of hydraulic pipe joints
- Affected by high-pressure oil and temperature changes
- Prone to aging and wear, resulting in oil leakage
Maintenance: Inspect and replace every 6-12 months (shorter cycles in humid environments)
Hydraulic Oil Filter
- Filters impurities in the oil
- Long-term use causes blockage affecting oil supply efficiency
Maintenance: Replace every 3 months to prevent impurities from entering the oil cylinder
Mechanical Structure Components
Strapping Belt Guide Wheel/Roller
- Long-term friction with strapping belt causes surface grooves/wear
- Can cause belt deviation if worn
Maintenance: Inspect every 2-3 months, replace when severely worn
Blade (if equipped with cutting function)
- Used to cut strapping tape
- Frequent cutting dulls the blade edge
- Wears faster when processing thick steel strips
Maintenance: Sharpen every 1-2 months, full replacement every 6-12 months
Compression Push Plate Slider
- Supports push plate reciprocating motion
- Friction with guide rail causes wear
- Affects compression accuracy when worn
Maintenance: Regular greasing, replace when wear exceeds 0.5mm
Electrical & Control Components
Travel Switch
- Sensors controlling push plate compression endpoint
- Frequent triggering causes contact oxidation
- May fail to send shutdown signal when worn
Maintenance: Clean quarterly, inspect and replace annually
Buttons & Indicator Lights
- Operation panel buttons may fail from frequent use
- Indicator lights burn out after long-term use
Maintenance: Low-cost wearing parts - replace immediately when faulty
