Swarf Briquetting Press Installation Guide
Follow these steps to properly install your Swarf Briquetting Press for optimal performance and safety.
1. Prepare the Installation Site
Proper site preparation ensures stable operation and accessibility.
- Choose a flat, dry, well-ventilated location
- Ensure floor can support full operating weight
-
Maintain adequate space for:
- - Operation
- - Maintenance
- - Material handling
-
Verify electrical requirements:
- - Correct voltage/frequency
- - Sufficient power capacity
- - Proper grounding system
2. Unpack and Inspect the Equipment
Thorough inspection prevents future operational issues.
- Check all components: Press Body Hydraulic System Control Cabinet Feeding Device
- Compare against equipment manual checklist
-
Inspect for transport damage:
- - Scratches/dents
- - Loose connections
- - Missing parts
3. Install the Press Body
Positioning
- Place on prepared foundation per installation drawing
- Use precision leveling tools
- Ensure horizontal & vertical alignment
Securing
- Fasten with anchor bolts
- Tighten bolts evenly and sequentially
- Prevent vibration/displacement during operation
4. Connect Hydraulic System & Control Cabinet
Hydraulic Connections
- Follow hydraulic system diagram
- Ensure leak-proof connections
- Fill with recommended hydraulic oil to proper level
Electrical Connections
- Connect control cabinet to press components
- Verify correct wiring
- Power on and perform initial setup per manual
5. Install the Feeding Device
- Position for smooth material flow
- Align with press intake mechanism
- Adjust feeding speed/quantity controls
- Test with sample material before full operation
Proper installation following these steps will ensure your Swarf Briquetting Press operates efficiently, safely, and with minimal maintenance requirements throughout its service life.
