Iron Shearing Machine Operation Guide
Operating an iron shearing machine requires strict adherence to safety protocols and proper procedures.
1 Pre-Operation Inspection
Thoroughly inspect the machine before each use.
Inspection checklist:
- Check blade sharpness and condition
- Ensure all safety guards are intact
- Verify hydraulic/pneumatic system functions
- Inspect for oil leaks or air pressure issues
Safety Glasses Cut-Resistant Gloves Steel-Toe Boots Hearing Protection
2 Workpiece Setup
Proper material handling ensures accurate cuts and operator safety.
Setup procedure:
- Secure workpiece firmly using clamps
- Adjust back gauge to desired cut length
- Reference machine manual for precise measurements
- Clear work area of obstructions
3 Machine Operation
Power on the machine and let it reach operating pressure.
Operating guidelines:
- Stand beside machine, never in blade path
- Keep hands at least 15cm from blades
- Activate shear using foot pedal/control button
- Maintain steady grip without overreaching
Critical Safety Reminder: Never bypass safety features or emergency stops. Always wait for complete blade retraction before removing cut pieces.
4 Post-Operation
Proper shutdown and maintenance ensure long machine life.
Shutdown procedure:
- Power off machine completely
- Clean all debris from work area
- Perform quick post-operation inspection
- Report any abnormalities to supervisor
Manufacturer's Note: Always follow the specific guidelines for your machine model. Rushing the process or improvising techniques can cause severe injury.
