english 
1. Installation preparation
Determine the installation location: Choose a flat, solid ground, leave enough space around it for easy operation and maintenance, and consider ventilation and light conditions.
Check the equipment: Check the delivery list carefully to see if all parts and accessories of the Briquetting machine are complete and whether there is any damage or deformation.
2. Installation process
Place the equipment: Use appropriate lifting equipment to place the main body of the Briquetting machine steadily in the predetermined position, adjust the anchor bolts to make the equipment level, and use a level to check to ensure that the equipment does not tilt.
Connect components: According to the instructions, connect each component in turn, such as the feeding device, discharging device, transmission device, etc., to ensure that the connection is firm and the gap meets the requirements. For belt transmission devices, adjust the tension of the belt; for chain transmission devices, ensure that the chain is moderately tight.
Install the electrical system: Have a professional electrician connect the power cord to ensure that the wiring is correct, firm, and well grounded to ensure the safe operation of the equipment. At the same time, install the control device, and perform preliminary debugging to check whether each button and switch is working properly.
3. Debugging steps
No-load debugging: Start the equipment without adding materials, let it idle for a while, and check whether each component is running smoothly and whether there are any abnormal sounds and vibrations. Observe whether the operating temperature of the motor, reducer and other equipment is normal, check the lubrication of each lubrication point, and ensure that the lubrication system works well.
Load debugging: After the no-load debugging is normal, gradually add a small amount of material to observe the equipment's handling of the material, including whether the feeding is smooth and the briquetting effect. According to the quality of the briquetting and the operating status of the equipment, adjust the pressure, speed and other parameters of the Briquetting machine in time until the ideal briquetting effect is achieved. During the debugging process, pay attention to the operation of each component of the equipment. If there is any abnormality, stop the machine immediately for inspection and troubleshooting.
